Reflective Trailer Tape Ontario CMVSS 108
Reflective Trailer Tape Ontario CMVSS 108 — regulation-validated, made in Niagara. Fast turnaround on 5+ year outdoor vinyl, shipped nationwide.
Select Your Options
Choose your height, package, and material below. We produce and ship in 1-2 business days.
Not sure what you need? Call (289) 228-7021 or email us
We confirm your text and layout before cutting. No payment until you approve your proof.
Reflective Trailer Conspicuity Tape — CMVSS 108
DOT-C2 certified retroreflective conspicuity tape required on all trailers over 4,536 kg (10,000 lbs) GVWR and over 2,032 mm (80") wide. Red/white alternating pattern, 50mm (2") wide, engineer-grade sheeting.
Regulatory Snapshot
| Specification | Requirement | Legal Reference |
|---|---|---|
| Vehicle Class | Trailers >2,032mm wide & >4,536kg GVWR | CMVSS 108 / TSD 108 |
| Side Coverage | Min. 50% of length (Red/White alternating) | HTA Reg. 587 |
| Rear Coverage | Full width (Lower) & Inverted 'L' (Upper) | FMVSS 108 / CMVSS 108 |
| Certification | DOT-C2 Permanent Marking Required | Transport Canada TSD 108 |
Regulation
CMVSS 108 (TSD 108) — Retroreflective sheeting required on sides and rear of trailers. Red/white alternating pattern. Must meet DOT-C2 certification. Non-compliance results in out-of-service orders at weigh stations and CVSA inspections.
Application Guide
- Sides: Lower half of trailer, as close to horizontal centre as practical. Segments must cover at least 50% of trailer length.
- Rear: Full width across the bottom, plus vertical strips on each side. White tape on rear.
- 25 ft roll — enough for one side of a standard trailer
- 50 ft roll — both sides of a standard trailer
- 150 ft roll — complete trailer (both sides + rear + extra)
Related Products: Browse All Compliance Decals | Compliance Guides
Built to Last: 7-year outdoor-rated premium vinyl. Engineered for Canadian winters, car washes, and highway conditions.
Made in Canada — designed and produced in Port Colborne, Ontario.
Reflective Trailer Conspicuity Tape — CMVSS 108 DOT-C2
- Premium outdoor vinyl reflective trailer conspicuity tape designed to meet CMVSS 108 and DOT-C2 regulations.
- Red/white alternating pattern, 50mm (2") wide, engineer-grade sheeting for optimal visibility in low-light conditions.
- Necessary for trailers over 4,536 kg (10,000 lbs) GVWR and over 2,032 mm (80") wide to ensure compliance with traffic safety standards.
- Complies with CMVSS 108 (TSD 108) regulations requiring retroreflective sheeting on sides and rear of trailers.
Installation Tips:
- Clean the surface thoroughly to ensure a strong bond. Use a degreaser if necessary.
- Apply the tape in sections, starting from one end to the other for uniform application.
- Use a squeegee or clean cloth to remove any air bubbles and ensure full adhesion.
- Allow the tape to cure according to manufacturer instructions before use.
What's in the Box:
- 10 meters of red/white reflective trailer conspicuity tape
- Application guide
- Cleaning cloth (optional)
Frequently Asked Question:
Q: How long does the reflective tape last before it needs to be replaced?
- A: The lifespan of the reflective tape can vary depending on environmental conditions, but typically lasts between 3-5 years. Regular inspection and replacement as needed are recommended.
Related Products & Guides
Required under CMVSS 108 (Canadian Motor Vehicle Safety Standard 108) and DOT-C2 specification for all trailers over 2,032 kg (4,480 lbs) GVWR. Transport Canada mandates retroreflective conspicuity tape on the rear and sides of commercial trailers for nighttime visibility. Non-compliance results in vehicle inspection failures and out-of-service orders.
Under O.Reg 413/05 and CMVSS 108, commercial trailers must have retroreflective conspicuity tape for nighttime visibility. Transport Canada requires DOT-C2 specification tape on all trailers over 2,032 kg GVWR. Non-compliant trailers receive immediate out-of-service orders during MTO inspections. 7-Year rated. Made in Canada.
What You Get
- One roll of heavy-duty retroreflective conspicuity tape in the selected length (25 ft or 50 ft)
- DOT-C2 certified red and white alternating pattern for legal compliance
- Professional-grade engineer sheeting or G11 reflective material for maximum night-time visibility
- Industrial-strength adhesive backing designed for long-term outdoor trailer application
- Printed CMVSS 108 compliance lettering integrated directly into the tape surface
- Basic application guide for proper placement on trailers over 80" wide
Port Colborne, Ontario
Orders are processed and ready for dispatch within 2 to 3 business days.
5-year outdoor durability, made in Canada
Questions? Call 289-228-7021 — free design help included.
Free tool — verify your vinyl colour meets MTO high-contrast requirements before ordering.
Regulation Change Alerts
Get notified when Transport Canada or MTO changes lettering requirements. Free. No spam. Unsubscribe anytime.
CASL compliant. We only send regulation updates. Unsubscribe link in every email.